I.T. Discussion Community!
-Collapse +Expand
Linux
Search Linux Group:

Advanced
-Collapse +Expand Linux Store
PRESTWOODSTORE

Prestwood eMagazine

June Edition
Subscribe now! It's Free!
Enter your email:

   ► MB LobbyLinux Users Board   Print This    All Groups  

Linux Users Most Active Threads

  


6 Threads:


Thread 6 of 6
Thread Starter  

dieck
Linux virtual machine
Does anyone know of a virtual machine running on late model hardware that could run corel linux second edition?
Posted to MB Topic: Linux End-User
12 years ago
5 replies. Last post:

frumiami
Try Oracle Virtual Box! It's free! -Shawn
9 years ago
Nothing New Since Your Last Visit
8198
Hits

Thread 5 of 6
Thread Starter  

rt
New Linux toy - WuBi
{Too Long!}
Posted to MB Topic: Linux End-User
11 years ago
2 replies. Last post:

rt
You've got to change those coffee cups into wine glasses  I think the small distro you want for the memory stick thing is Puppy Linux .
11 years ago
Nothing New Since Your Last Visit
5108
Hits

Thread 4 of 6
Thread Starter  

Rick Carter
Specifying Installation Path (SuSE 7.0)
I'm dual booting Windows and Linux on my laptop, so I have limited hard disk space. I want to have the more "essential" Linux programs loaded on my hard drive, and always available to me., When I'm at home, I'm almost always connected to a SCSI Jaz drive. I would like to be able to try out some other space-hungry Linux programs by loading them to the Jaz drive, while retaining my basic system that I can run stand-alone. How can I tell Linux that I want a program loaded to the Jaz drive?
Posted to MB Topic: Linux End-User
18 years ago
2 replies. Last post:

Rick Carter
Thanks for the info. Since that post, I've had some problems with Iomega, and I'm trying to move away from solutions that use the Jaz drive. Still, it's good to know that there is a way, though I would hope someone creates a more new-user-friendly solution some day. I can't believe I'm the only one who cares where my files get installed.
17 years ago
Nothing New Since Your Last Visit
3538
Hits

Thread 3 of 6
Thread Starter  

Rick Carter
Ramdisk as primary swap
On my notebook I have 160M RAM, but limited hard drive space, so I've only set aside 128 M for swap space. I know that Linus Torvalds himself has said that there are times when Linux tries to swap out everything in RAM, and so swap should always be at least two times the RAM. I've had some problems that I think may be directly related to this., , It's been recommended to me that one solution is to set up about half of my RAM as a Ramdisk, then tell Linux to make that Ramdisk the primary swap file. But I'm a Linux newbie, and I need more detailed instructions on just how to set that up. Can someone point me to the necessary information? I'm running SuSE 7.0.
Posted to MB Topic: Linux End-User
18 years ago
1 Reply:

Leo
PEW this issa tough one. I could probably do this off the top of my head if I wasn't a newbie too Big Grin! Best I can do is point you to http://www.tldp.org I've found manny answers for my own unusual questions there, especially in the HOW TO's. Good luck and PLS report back if you manage to fix this up.
17 years ago
Nothing New Since Your Last Visit
3580
Hits

Thread 2 of 6
Thread Starter  

Casey Hughlett
Active Server Pages for Linux
Chili!Soft ASP purports to provide ASP functionality in a Linux environment. Has anyone tried this product? Perhaps it is possible to create an ASP-enabled web server using Paradox..., [URL=http://www.chilisoft.com]Chili!Soft home page[/URL]
Posted to MB Topic: Linux Coding - General
18 years ago
1 Reply:

mprestwood
I don't have any experience with this particular product, but I did find the following review:, , [URL=http://www.15seconds.com/Issue/990304.htm]www.15seconds.com/Issue/990304.htm[/URL], , The review seems favorable and the most pertinent phrase for me was, "There is little difference between IIS ASP and Chili!ASP...".
18 years ago
Nothing New Since Your Last Visit
7660
Hits

Thread 1 of 6
Thread Starter  

Lamar
Server and storage connection.
Hi guys, Hope someone know how to solve the problem I am facing. I have two servers(poweredge sc440, if needed to know the machine) with Redhat 5.2 linux. I was working on this to servers to hook it to D1000 sun storage with 12 disks in it. The storage need ultrascsi cable and the kind of controller is HVD. I beleive I have everything I need to setup hardware wise. Once I make the connection to the storage I can start up the first server and it can see all the disk but when I try to strart the second server it just never make it. it just hang for awhile and it boot up but there is no way I can see the any of the disk on the storage. I assumed there is a problem with the initiator id. I figured there is an ID conflict in the   chain. Can anybody tell me how to reconfigured so that the two server can have two different initiator id to avoid the conflict. Any help will be appreciated.   
Posted to MB Topic: Linux End-User
11 years ago
Nothing New Since Your Last Visit
3274
Hits
Follow PrestwoodBoards on: 


©1995-2019 PrestwoodBoards  [Security & Privacy]
Professional IT Services: Coding | Websites | Computer Tech