I.T. Discussion Community!
Steven.G -Collapse +Expand
Employee
-Collapse +Expand
Steven.G
-Collapse +Expand Profile
Member Info
Member Narration

POSTS:
MB Posts (303)◄╣

Search Steven.G:

Advanced
   ► MB Lobby   Print This     

Steven.G Message Board Activity

  


25 Message Board Posts:


Thread 25 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Use a variable in QBE as a res
genenric answer, yes.. but specific answer, in this example, no.. because the field type isn't the same.. you can "calc something as" to the same field type only
Posted to MB Topic: QBE & SQL « Paradox Board
70 hours ago
New Stuff Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 24 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Windows 10 and Paradox 9
p9, p10, and p11 are all fine, either way.. you don't need to get the 32bit win just for that, cuz then you have to get the old 32bit office, etc
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
10 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 23 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Where to Find Service Packs Fo
I still have the links to the corel ftp on my page http://www.oasistradingpost.com/cartpages/morelinks.htm
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
25 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 22 of 25
Thread Starter or a Reply (but not last)  Group

Paulo.C
Paradox stops running when I change printer
Hi! I have an application for driving school management, and on most computers where it is installed, from windows xp to 10, when I press a button to choose another printer, the paradox stops running. thank you for your support
Posted to MB Topic: Paradox Reports « Paradox Board
34 days ago

Steven.G
> Probably I'll have to run this way, the problem is that in the printer interface the screen is all in English, and the application is in Portuguese. I got the notice that you posted this, but it does not show here yet if there is a language issue, that might be part of the problem.. can you insert little temporary msgInfo messages in the printing process, to see how far it gets? to determine the specific line it fails on?
34 days ago
Nothing New Since Your Last Visit
37
Hits

Corel Paradox / ObjectPAL Coding

Thread 21 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Paradox stops running when I c
> Probably I'll have to run this way, the problem is that in the printer interface the screen is all in English, and the application is in Portuguese. I got the notice that you posted this, but it does not show here yet if there is a language issue, that might be part of the problem.. can you insert little temporary msgInfo messages in the printing process, to see how far it gets? to determine the specific line it fails on?
Posted to MB Topic: Paradox Reports « Paradox Board
34 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 18 of 25
Thread Starter or a Reply (but not last)  Group

KBNV
Fonts in Win10 v1809
I just set up Paradox on a new system running the latest ver of Win 10 (1809).  My reports on the new system required a complete revision of the fonts used in the report.  I've been using the same ones for years and the fonts have always migrated to the new system.  This time, however, the fonts are not available in the properties, font drop down for any of the fields in my report.  The fonts are installed in the usual place and are available to the other myriad programs.  I installed Paradox from an X9 disc which I know doesn't make a difference.  I even uninstalled Paradox from the system and reinstalled using the X8 disc in the hope that it would make a difference.  It, of course, did not.  I am using other fonts that provide a similar impact.  But, not the same. Any body have any suggestions? Thanks in advance. Karen
Posted to MB Topic: Paradox Reports « Paradox Board
6 months ago

Steven.G
find it, deleted it.. then kill the registry entries.. usually 3 or 4 of them
34 days ago
Nothing New Since Your Last Visit
150
Hits

Corel Paradox / ObjectPAL Coding

Thread 17 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Fonts in Win10 v1809
find it, deleted it.. then kill the registry entries.. usually 3 or 4 of them
Posted to MB Topic: Paradox Reports « Paradox Board
34 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 16 of 25
Thread Starter or a Reply (but not last)  Group

rum
Forms Event Model Confusion
I have never found just the right combination of events for the following situation. In the following argument..... "C:\Program Files (x86)\Paradox\Programs\pdxwin32.exe" -c -q -pE:\OutsourceWork\V11\priv -wE:\OutsourceWork\V11 _stub.fsl Paradox will launch and display the _stub.fsl   form (no problem) When the form opens I want specific code to run AFTER the form is fully displayed. Two question 1.  How do I WAIT until the form is fully displayed 2. What event should I put the code in? My current problem is that there are 5-10 function calls that take place, each displaying results in a list on the screen.  And regardless of how many SLEEP() I put in the thing it will not display the form until about  halfway through the code execution. Sometimes only flickering onto the screen briefly before closing. Many thanks!
Posted to MB Topic: Paradox Forms « Paradox Board
52 days ago

Steven.G
geez, that was a long-shot.. no wonder it took so long to figure it out.. wow !!
51 days ago
Nothing New Since Your Last Visit
56
Hits

Corel Paradox / ObjectPAL Coding

Thread 15 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Forms Event Model Confusion
geez, that was a long-shot.. no wonder it took so long to figure it out.. wow !!
Posted to MB Topic: Paradox Forms « Paradox Board
51 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 12 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: OPAL to DISPLAY QB Tool
no clue.. still thinking about.. tried everything under Edit, Design, Open, etc.. don't know that I've ever tried to do that.. I've made forms where the user can enter parameters, then I validate, then I plug into a query.. but I don't know how to pull it up, visible, in code
Posted to MB Topic: ObjectPAL « Paradox Board
65 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 10 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: .lck file issues
navigation.. always the same table? same user? same type of data change? printer.. same printer? same user? same report? these are example questions.. again, looking for patterns, looking for clues
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
69 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 7 of 25
Thread Starter or a Reply (but not last)  Group

rum
Private Path
Does anyone know if DURING the install of Paradox (v11),  whether any paths are saved in some hidden/buried config file? This is the issue.  I have a user (Win 10,  PDOX 11) whose software is not acting normally.  while instigating I decided to run table repair.  However,  when table repair launches it throws an error regarding the ERRORS.DB table in the blahblah\pdxpriv folder.  Only the path it is barfing up is not the the private folder that is set/configured in paradox.   Wondering where it is finding this erroneous path. Thanks jeff
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
88 days ago

Steven.G
depending on how you install and how you configure the bde, there can be any number of entries in the registry.. with p11, there are also the potential conflicts of not clearing that stupid reg cleaner thing from the machine and the registry.. what you see is NOT always what you get
88 days ago
Nothing New Since Your Last Visit
50
Hits

Corel Paradox / ObjectPAL Coding

Thread 6 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Private Path
depending on how you install and how you configure the bde, there can be any number of entries in the registry.. with p11, there are also the potential conflicts of not clearing that stupid reg cleaner thing from the machine and the registry.. what you see is NOT always what you get
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
88 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 5 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: formatted memo question
the data entry behavior, for memo and formatted memo, are essentially the same in a raw table session.. when you go to the field in edit mode, and hit F2 or Shift-F2, you get a "notebook" kind of screen.. you're in Memo View mode.. you're entering raw text, which includes tab, enter, and all the other ascii characters but on a form, F2 puts you in Field View mode, Shift-F2 puts you in Memo View mode.. for a formatted memo field, that's not the same.. you need to be in Memo View mode to use tab, enter, and all the ascii stuff but the point remains, you're still just entering the same "text" stuff, either way.. the purpose of the "formatted" memo, and all the other BLOB field options, was to allow it to contain stuff that paradox itself could not create.. that's one of the things all the "read to/from file" commands are for over time, we found out that all of this BLOB stuff was mostly a really bad idea
Posted to MB Topic: ObjectPAL « Paradox Board
92 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Thread 3 of 25
Thread Starter or a Reply (but not last)  Group

PS_2069
Paradox 9 not working after Win 10 upgrade
I need help.  All of my Paradox 9 runtime users are getting the following error message after I upgraded 3 workstations to Windows 10.  Not all workstations have been upgraded but now they all receive the following error message when attempting to login to Paradox... An error was triggered in the 'qlocate' method on an object of TCursor type....TCursor not opened.  Our server is Windows 2012 Any help is appreciated.
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
116 days ago

Steven.G
F:\IDAPI\BDE\idapi.cfg that way, they're all pointing to one file.. if you change anything, you only change it once in THAT file, make sure it says the net file is in that same folder, too
93 days ago
Nothing New Since Your Last Visit
190
Hits

Corel Paradox / ObjectPAL Coding

Thread 2 of 25
Thread Starter or a Reply (but not last)  Group

Steven.G
RE: Paradox 9 not working after Wi
F:\IDAPI\BDE\idapi.cfg that way, they're all pointing to one file.. if you change anything, you only change it once in THAT file, make sure it says the net file is in that same folder, too
Posted to MB Topic: Paradox Setup, Vista, etc. « Paradox Board
93 days ago
Nothing New Since Your Last Visit
Corel Paradox / ObjectPAL Coding

Follow PrestwoodBoards on: 


©1995-2019 PrestwoodBoards  [Security & Privacy]
Professional IT Services: Coding | Websites | Computer Tech